Відео

I really do not know that specific CPU, but my guess is that the memory is either not compatible with the motherboard overclocking, or the motherboard does not support it for any memory make/type.

Thank you Ron for the nice comment - as always 🙂

I believe you nee to get yourself an ARGB hub. Then the software provided would give you some of the control you are lookin to achieve.

You will need to get an ARBG hub, and hopefully the software provided will allow you to control those colors.

@@PE4Doers Oh ok. Aww one more thing, can you please suggest me one actually I am very much confused.

I am not really familiar with that unit. Did you see any reviews or comparisons between that unit and the Fluke I reviewed? I honestly can say that Fluke equipment has always served me very well, and have been very accurate?

on a related matter, have you tried for instance, to boot from a device connected to the EXT4 card?

Do you have the TB4 in a 4X slot on your motherboard. I have heard of some people placing it in a 1X slot and experiencing some some strange results.

I have not attempted that, so I really can't give a technical opinion in that area.

@@PE4Doers many thanks. the manual for this motherboard (prime x670-p wifi from asus) says the thunderbolt card canonly be used in the bottom x16 slot.so i put it there.

Sort of - that extra current capability will provide up to four times the amount of power to the devices plugged in to the USB-C connectors. Even without it, power will be provided, but it's light a 'fast' charger rather than an 'average' charger, and can support full power to larger devices (like a small to medium sized laptop).

I am not familiar with the CalDigit3, however I wish you luck.

I apologize, but I really don't know. Have you reached out to the manufacturer?

The only way I know of supporting ARGB fans on a motherboard with the proper connector is to add-on an ARGB Hub.

You are very welcome. Thank you for the nice comment.

Yes, it does have Bluetooth. One of the 'key' advantages of using a Creator Motherboard - Connectivity is the prime directive. Here is an except from the User Manual: Bluetooth V5.3 Hardware Ready- The Bluetooth version may vary, please refer to the WiFi module manufacturer's website for the latest specifications.

@@PE4Doers Ah, I see it now. I've read that and the WRX 90 specs many times and didn't realise the connector for the WiFi and BT is an M.2. Thank you very much.

@@FrankEdavidson You are welcome.

Glad it was helpful! Thanks for the comment

I'm not sure what you are referring to...

@@PE4Doers 1st time I've seen a mem mhz listing above 1000 in the 10s, let alone a BIOS listing 👀

@@DougguoD I do apologize, I am still missing some context on your question. When you talk about 'any' form ov overclocking (even when the motherboard had some preset that is likely checked with many different memory DIMMS), it is still a risk. Their is nothing that can be 100% guarantted when silicon is involved.

@@PE4Doers 0:34 D.O.C.P DDR4-3603 I'd think 3600 OK, but 3603 ? anywho, as some extra entertainment, I had a look at this vid 'cause 2nd time now (2 diff processors) xmp has sorta killed the cpu so that I had to reseat the cpu to fix, and now understandably leery of xmp-ing again, so I'm looking to manually boost beyond the current dismal auto setting of 2440 🙁 just rechecking, really.

Oops, 2400mhz - just reset it manually to 3200 @ 1.35v ✅

In my second job (1977 through 1981), I worked for DEC as a Field Engineer and repaired the entire line of PDP-11's, with the 11/70 being my favorite to work on. Then from 1981 through 1987, I was a corporate software support Engineer (and it helped I knew the hardware very well), followed by a systems programmer, on that same line of systems. The software (including the Operating System) was custom created by that company. I should make a video (or hold a live stream) just talking about some of my experiences back then as first a hardware then a software engineer.

What AIO are you planning on using? I am very happy with the Artic Liquid Freezer III I used in the upgrade to my previous Virtual Memory Application Server build.

@@PE4Doers I'm planning Arctic Liquid Freezer III 420 (for 14900k) but it is still unavailable in my country. Hopefully, it might be available with in July as Arctic importer said. I might use Cooler Master HAF 700 EVO or Lian-Li O11 Dynamic EVO XL as Casing. Already purchased, Motherboard Asus ProArt z790 Creator Wifi & GPU, GALAX RTX 4080 16GB. But still not sure about additional case fan & number of RAM. For your kind opinion please.

Thanks for watching and the comment. I started videoing the next part today, and will try to get it uploaded this weekend.

@@PE4Doers 👍🏻😊

Thanks Jeremy, I am actually getting ready to start the next part this afternoon or tomorrow. I will be soldering on most of the components to the PCB. I'm not sure if I will be able to add the four RS-232 ports however, since I am still waiting for the parts.

I wish I could, however spoken (written) languages are not my strong point. Its is actually unfortunate, since my mother was Cajun French and my youngest daughter minored in French and spent a semester abroad about an hour north of Paris when she was in college.

I do not think so since according to the manual and specifications, on 6TB is supported by the hardware and firmware :(

Three things you need to ensure: 1) you will need SATA Power for the drive. You might be able to simply add a small power supply to your external hard drive, but the posses some risk depending on whether that power supply is meant to power SATA. I think you should invest in an external enclosure that support an eSATA drive (they cost between $25 and $40, depending on whether you want it to also support USB connections). 2) Is that drive you want to use a 'Security" drive (Green labelled usually)? Although any drive may work for a while, the massive number of continuous 'writes' of middle-sized snippets from the camera, would cause a drive not meant to handle that heat up quickly and continuously. I have read a article that you should only expect about half the usable life if not engineered for security systems. 3) The REOLINK disk controller on my unit only supports two drives at a maximum size or 6TB. You may have a newer mode that supports more, but you should double check that manual and the specifications for you system.

What model is your board? That may be what that manufacturer calls the CPU Fan.

You are very welcome, and thanks for the very nice comment 🙂

Thank You.

WOW, I got mine for less than half that. I will need to go check that out.

@@PE4Doers Newegg

It sounds like you have an ARGB fan (that Only worked at 5-volts), and a legacy RGB connector (that only outputs 12-volts) on your motherboard. See if there is also an ARGB connector. If not, do not plug it in, or you will blow something out, most likely the Fan, but you could also trip the over-current sensor in your Power Supply, which you can reset by turning your PC off for at least five minutes.

@@PE4Doers it’s not an ARGB, does that make it okay. And thank you for your help

@@IdiotSauce29 You are quite welcome. Now you have me wondering if that fan is meant to be connected to a proprietary RGB controller. Is it just one fan, or two to three?

@@PE4Doers they are all connected 3 fans to be exact

@@PE4Doers my fans spinned when I turned it on so ima just roll with it

I am not familiar with the Buffalo TeraStation. Do you know the largest disk size that supports it? Also, Buffalo has some really good online help that can address a specific unit.

​@@PE4Doers yeah i did find some forum threads about that, some people there even got working it with 4x8Tb disks official web-site also mention that it doesn't support expanding array so mine guess we have to just get rid of 4x1Tb disks and replace them with something larger then create a new arrays without rebuild or anything, thanx for responding anyway

Better than nothing. You just need to not over-swamp the CPU area, since the 30% that is not pure alcohol will take a lot longer to dry, so if it creeps under a crevice, it could lead to a short if power is applied before it dried.

I had mine set to the standard (default) PROGRAM AE 9auto exposure when using the kit lens. When I changed to the telephoto lens I set it to PROGRAM AE TELE. In both cases all I needed to do was manually set the focus with the lens curly wheel. You may want to take a look at my Part 1 video on this camera: ua-cam.com/video/Jl2XE0_6K74/v-deo.html . Good luck.

I watched both videos! Thank you! I really appreciate your thorough videos and explanation! So excited to try my t70!

@@yovannagarcia9926 I am hoping all the best for you and you new toy. I still have two rolls of film I need to use before they get too old, so I will likely be making another video very soon on that last film camera I used before everything turned Digital

I will look into doing that

You should always check for BIOS updates. In fact, there was another one issued for this motherboard just a week ago, which I updated just yesterday while the board is still outside the case. Also, I do not believe you need an update for the 13th Gen CPU's, only the 14th. But it is not an update you need to get the system to boot, just some additional features that will be enabled. Also, this motherboard has the ability to boot without a working BIOS in it, since it can Flash the ROM directly following a simple procedure shown in the User manual toward the end. So, if you accidentally corrupt the BIOS, you will not have 'Bricked' the motherboard since you can easily recover with a USB stick, and visiting the ASUS Website to download the latest working version.

@@PE4Doers thank you very much for this informations. Can you make an video "how do update bios" for this Asus proart z790.

@@Bourse786 Thanks. I was thinking about doing that. I will look into it tomorrow and if I do, I will include both how to do that with the BIOS working and also how to do it without the BIOS working.

@@PE4Doers Thank you in advance and I will wait for your video before updating my motherboard :)

That sounds like there is an incompatibility between you DIMM memory and the motherboard. You could try other memory, or start modifying the memory overclocking settings, which is something that is trial and error that I cannot setup for you over comments.

That generally works fine, unless your main switch is very low-quality. I assume you will be using 1G networking with PoE. Correct? If you are going faster than 1G, or require PoE, then there many be issues.

I am not familiar with any of the 'hikvision' equipment. But if I'm understanding it correctly from you question, your power supply unit fan may have failed and you are hoping to avoid replacing it. Am I understanding that correctly? Honestly, if you lost the fan in your power supply you should replace that (or the entire power supply).

@@PE4Doers the case is my dvr is inside a verical box inside the wall, the box has tiny holes ofc but i want to add extra cooling fan to the box without interrupting the dvr equipment itself. In the meantime i Don't want the fan to be working 100% 24/7 that's why i thought of connecting it to the electronic board of te dvr

My go to is the NEXIGO Iris as a Webcam with great features. I use it for all my Zoom sessions (since I have a second side-hustle where I teach my hobby). In terms of a higher end 'versatile' camera, for that I use the Sony ZV-E10. I use mine mostly with a gimbal for videos outdoors and on the move, but prior to getting my ZV-E1 (a 'much' more expensive camera, which is now 'mostly' my studio camera for UA-cam content creating), the ZV-E10 was the top of my use list. I hope I've helped. Thanks for the comment, really. You've actually given me an idea for one of my next Camera videos 🙂

@@PE4Doers thanks so much! Glad I gave u some ideas! You and your daughter can do yoga together! 😄😎🥳 Oky so the Iris sounds like the one & maybe later I can get the Sony one too 😃🐬🔆 happy content creating! Cheers 🙏🌲🐚🌴

@@ceararobertson1119 Sounds like you have a great plan.

I'm very glad I could help. Thanks for the comment.

Thank you for the comment. Yes, I still use my Batmax batteries in two of my three Sony ZV-x cameras. They work 'ok'. Compared to Sony batteries however, after more than a year they only last half as long as the Sony's. I still believe I've made out ok however, since they are less than 1/3 the price (even today). I only use Sony batteries however, in my highest-end ZV-e1 (which cost more than three times my other two Sony cameras. I hope that helps.

No problem. I am always interest in the opinions of others and don't back down from a challenge. The US flag is part of me - especially these days. I saluted it at every opportunity while rising from a Basic Scout to an Eagle Scout (with 39 Merit badges and a Silver Eagle palm). Then again with the year I spent as a Cadet at the US Air Force Academy. I retired from working Day-Jobs earlier this week, after working for a pay-check full-time for more than 49-years (earning three degrees part-time). I have asked my family to make sure I have a US Flag draped over my coffin (or box of ashes), when I move up to the big flag in my next life. Thank you for the kind comment Sir.

@@PE4Doers You have accomplished so much in life. I salute the American flag and now I salute you. Thank you for being a true and outstanding American!!!

The very-wide 'yellow' tape I use is meant to mask spray painting on various surfaces, such as auto refinishing. My wife and I now buy it in bulk and use it for everything. amzn.to/4bPRP27

I have seen that on Motherboards for quite a few years. My 'guess' is that it is possible for a case to the Power connector contained in a two-pin socked, or two separate one-pin sockets to give the installer the option of plugging it in either way. Although, the only ones I have ever seen are two one-pin sockets. Another possibility could be a three-pin socket, that some labelled vendor preferred using at one time, and nobody wanted to catch flack for not supporting that. As I said, my answer her is mostly hypothesis.

Sorry to hear that. Does that motherboard have XMP or the AMD equivalent?

@@PE4Doers yes its does I did set it profile one but the ram speeds just don't change at all

@@theeimmortal2355 Sorry to hear that. There is likely some incompatibility between you motherboard and those DRAMM modules.

@@PE4Doers can be I got the XPG Adata 16GB ram at 3000hz speed

@@theeimmortal2355 I did not check the compatibility list with your motherboard. Are they a 'tested' compatibility match?

You are very welcome. Thank you for the nice comment.

Sorry, they are not. They can pick up everything they hear, but there is no capability to respond.

Thank you

What will you be testing?

@@PE4Doers i have a b550 mobo that does not post so i ll test ur trick on it

Thats is not the ram, not the cpu, not the gpu so .. haha

You are quite welcome. Thanks for the very nice comment.